Screensaver (For Preventing After-Images); Mode Selection - Yamaha PDM-1 Bedienungsanleitung

Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
1
SET UP
2
Reversal / Scroll selection
3

Mode selection

4
After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off.")
Screensaver
Function
Mode
Start Time
Finish Time
SP Adjustment
28
(For preventing after-images)
Press to display the Setup menu screen.
Press to select the Screensaver.
Press to select the Screensaver screen.
Press to select the Function.
Press to select the desired function.
White bar scroll
White bar scroll : The white bar will scroll from left to right.
Image Reversal : Negative image will be displayed on the screen.
Press to select the Mode.
Press to select each mode items.
Off
Interval : Operates when Periodic Time and Operating Time are setup and those
times arrive.
Time Designation : Operates when Start Time and Finish Time are setup and those
On : Operates when the
If the Mode is at On, the menu screen will disappear and the
Screensaver will be activated.
To stop the Screensaver under On, press the
Screensaver
White bar scroll
Function
Time Designation
Mode
0:00
Periodic Time
0:00
Operating Time
Mid
SP Adjustment
Image Reversal
times arrive.
(ACTION) is pressed.
White bar scroll
Interval
0:00
0:00
High
Setup
Component/RGB-in select
Signal
Screensaver
English ( UK )
OSD Language
Set up TIMER
Screensaver
Function White bar scroll
Mode Interval
Periodic Time
Operating Time
SP Adjustment
Screensaver
Function White bar scroll
Mode Time Designation
Start Time
Finish Time
SP Adjustment
R
button.
Screensaver
Function White bar scroll
Mode Off
Start Time 0:00
0:00
Finish Time
SP Adjustment High
RGB
0:00
0:00
High
0:00
0:00
Mid