Warranty - Dolphin PRO OEM 24V40A Technischen Handbuch

WARRANTY

NOT_PRO_OEM-00
Warranty
TO PREVENT ANY RISK OF INCORRECT
USE OF THE DEVICE, CAREFULLY READ THE LIST
OF POTENTIAL EVENTS OR FAULTS NOT
COVERED BY THE PRODUCT WARRANTY
4This device is not protected against battery
polarity reversals. Risk of irreversible damage to
the equipment.
4 Should the device be dropped or fall this could
cause irreversible distortion of the housing as well
as a "crash" of internal fans and certain
electronic components.
4Modifications to the housing (additional holes
in particular) could result in the scattering of
swarf or metal filings onto the circuit board and,
consequently, in malfunctions or irreversible
damage to the equipment.
4Interference with or modifications to the circuit
board could result in operating modes not
originally anticipated, and consequently, in
malfunctions or irreversible damage to the
equipment.
4Powering the device from an unsuitable
energy source (as a general rule, mains supply
voltage that is too high).
4Accidental original mains supply surge or
lightning strike generally causing irreversible
damage to the equipment
.
4Replacement of fuses with fuses with
different characteristics that could cause
irreversible damage to the equipment.
4Obvious connection errors causing irreversible
damage to the equipment.
WARRANTY
NOT_PRO_OEM-00
4Water spray or running water inside the device
that could result in irreversible electronic
malfunctions.
Precautions for scrapping
This device contains electronic components and
materials that must be recycled at the end of the
product's usable life, for environmental reasons.
At the end of their usable lives all devices must
therefore be returned either to the local distributor
or entrusted to a specialist electronic equipment
recycling company.
EC compliance
This device complies with the applicable European
standards and has an EC mark. Its certificate of
compliance is available on request.
UK