Daikin FTXG20LV1BW Handbuch Seite 26

WEEKLY TIMER Operation
NOTE
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller fi rst.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with WEEKLY TIMER.
Other settings for ON TIMER are based on the settings just before the operation.
• Both WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set
while WEEKLY TIMER is still active. The WEEKLY TIMER will go into standby state, and "
ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Shutting off the circuit breaker, power failure, and other similar events will render operation of the indoor unit's internal clock inaccurate.
Reset the clock. Page 10
25
01_EN_3P357704-1.indd 25 01_EN_3P357704-1.indd 25
6.
Press to select the desired time.
• The time can be set between 0:00 and 23:50 in 10 minute intervals.
• To return to the ON/OFF TIMER mode setting, press
9
• Go to step when setting the OFF TIMER.
7.
Press .
• The time will be set.
• " " and the temperature blink.
8.
Press to select the desired temperature.
• The temperature can be set between 10°C and 32°C.
COOL or AUTO: The unit operates at 18°C even if it is set at 10 to 17°C.
HEAT or AUTO: The unit operates at 30°C even if it is set at 31 to 32°C.
• To return to the time setting, press
• The set temperature is only displayed when the mode setting is on.
9.
Press .
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and fl ashing of the multi-monitor lamp.
• The temperature and time are set while in ON TIMER operation, and the time is set
while in OFF TIMER operation.
• The next reservation screen will appear.
• To continue further settings, repeat the procedure from step
• The multi-monitor lamp blinks twice.
The TIMER lamp periodically lights orange.
The multi-monitor lamp will not blink orange if all the reservation settings are deleted.
Display
10.
Press to complete the setting.
• " " is displayed on the LCD and WEEKLY TIMER operation is activated.
• A reservation made once can be easily copied and the same settings used for another
day of the week. Refer to "Copy mode".
Page 10
.
.
4
.
Page 5
Page 26
" will disappear from the LCD. When
Page 12
Page 12
12/17/2013 3:22:16 PM 12/17/2013 3:22:16 PM