This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
[For Canadian model]
This Class A digital apparatus complies with Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the
user's right to operate the equipment.
Handling the discs
Avoid touching the signal surface when you
use a disc.
To hold it, place your fingers on the edge of
the disc or the edge of the center hole and
the disc edge.
Do not attach paper or stickers to the label
side of the disc. Handle discs carefully and
avoid damaging the label.
Discs rotate at high speed in the changer.
Do not use defective discs (e.g., cracked or
considerably warped). Such discs may
damage the changer.
DO NOT use non-standard discs, as these
may adversely influence this unit and other
equipment.
DO NOT play a CD having other shape than
a circular disc, such as heart shaped disc, or
malfunction may occur.
Do not use the following types of discs for they
may cause malfunction of the unit or damage
to the discs:
Disc which has a molding flash (projected
fin) left on the periphery as shown in the
illustration.
Disc with its edges are rounded or tapered
as shown in the figure.
3
<DRC1107>
En