Menu Options - Chauvet DJ Intimidator Scan 305 IRC Schnellanleitung

Intimidator™ Scan/Barrel 305 IRC QRG

Menu Options

Main Function
Address
Run Mode
Setup
Sys Info
DMX Linking
Starting
Address
Master/Slave
Connection
Programming Levels
001–512
DMX
Slave Slave1–4
Auto
Sound
IR
Pan
Tilt
P/T Speed
Color
Dimmer
Shutter
Manual
Gobo
Gobo
Rotate
Prism
Special
Function
P/T Macro
Pan Reverse
Tilt Reverse
Screen
Reverse
Sensitivity 001–100
Reset
Factory Set
Ver: VX.X
Running Mode: XXXXX
Dmx Address: XXX
Temperature: XXX
The Intimidator™ Scan/Barrel 305 IRC can work with a DMX controller
when linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from Chauvet.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
The Intimidator™ Scan/Barrel 305 IRC uses the DMX data connection for
its Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
Sets the DMX starting address
7CH
Selects DMX mode
11CH
Selects Slave mode 1, 2 ,3, or 4
Selects Auto mode
Selects Sound-Active mode
Selects infrared control
0 to 180°
0 to 90°
Pan/Tilt speed (fast to slow)
Selects color options
Sets dimmer value
Strobe effect with increasing speed
000–255
Selects Gobo options
Rotation effect with increasing speed
Selects 3-facet prism
Selects control functions
Selects pan/tilt movement macros
OFF Normal pan operation
ON Reverse pan operation
OFF Normal tilt operation
ON Reverse tilt operation
OFF Normal display
ON Reverse display
Sound sensitivity control
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
6
Description
EN