Preset Mode - VYPYR SANPERA I Spieler-Handbuch

SANPERA I
®
The Sanpera I operates in three modes, PreSeT mode, LooPer mode and Bank
SeLecT mode. The functions of buttons 1-4 will vary depending on which mode you are in.
1 2
3 4
™

PRESET MODE

5 6
When you first plug your Sanpera I into the amplifier
(using the provided 8 pin MIDI cable) the pedal will
default to PRESET mode. In this mode buttons 1-4
correspond with the four PRESET buttons on your
VYPYR
four presets within the bank (group of four presets)
selected on the amplifier. Remember, each VYPYR has
12 onboard presets, which are stored in three BANKS of
four labeled A, B and C. To change BANKS using your
Sanpera I, please see BANK SELECT mode.
To store your personal amplifier settings and replace one of
the onboard presets, simply press and hold the button that
corresponds with the location you wish to store the preset.
. Each button allows you to select one of the
®