Overview; System Requirements; Unpacking; Installing The Joystick - Sony RM-NS10 Installationsanleitung

Overview

The RM-NS10 remote control unit is intended to place
most of the NSR Series functions at your fingertips. You
can perform the following operations with the RM-
NS10.
Change the display layout "on the fly"
You can change the display layout of the feeds or the
recorded images you are monitoring "on the fly". You
can select from a 1 × 1 layout (1 monitoring display), 2
× 2 layout (4 monitoring displays), 3 × 3 layout (9
monitoring displays), or 4 × 4 layout (16 monitoring
displays).
Select cameras
You can select a camera with the keypad on the remote
control.
Control cameras
You can zoom, pan (with the joystick), tilt (with the
joystick), focus, and modify the brightness level of the
cameras, as well as preset their positions and configure
their active/inactive sequence.
Record, play back, and search images
You can use the remote control to start recording images,
play them back, pause playback, and more. You can also
switch between live feeds and recorded images "on the
fly", search through recorded images, and export
recorded images to peripheral devices.
Lock operation
If you ever have to leave your seat, you can flip a switch
and lock the operations from the remote control.
4
Overview / System Requirements / Unpacking / Installing the Joystick

System Requirements

The following requirements must be met to use the RM-
NS10 remote control unit.
A Sony NSR Series Network Surveillance Recorder or
computer running software compatible with the remote
control.
Note
For details about how to use the remote control with
compatible software, refer to your Network Surveillance
Recorder or compatible software documentation.

Unpacking

Upon unpacking the RM-NS10 Remote Control Unit,
verify that you find all the following. If any of the items
are missing, consult your dealer.
• Remote control (1)
• Joystick (1)
• Operating Instructions (1; this document)
There may be other documents in the package.

Installing the Joystick

Place the washer on the joystick screw located on the
right side of the remote control unit, and screw in the
supplied joystick over it.
Note
Make sure to attach the joystick firmly. Attaching it too
loosely or too tightly may result in improper
functioning.
Joystick
Washer
Joystick screw