Maintenance - rotor RBB2 Bedienungsanleitung

CH-3661 Uetendorf
Container: The mixing container should not be cleaned in the dishwasher while still
installed. They must first be dismantled.
The container should be cleaned thoroughly after each use or once a day.
Bowl: Can be cleaned in the dishwasher or clean by hand using hot water and a
commercial cleaning product. The gentlest method of cleaning is by hand using
a commercial household washing-up liquid. Never remove scale mechanically
(Causes scratches!) When washing in a dishwasher it is essential to ensure that
the plastic parts are removed and during washing are not mechanically loaded.
(e.g. by coming into physical contact with other parts). Use a special rinse aid for
plastics (polycarbonate)! The exact concentrations and settings advised by the
dishwasher manufacturer must be strictly adhered to. (Before polish drying the
parts all contaminates and remains of the cleaning solutions must be removed).
Otherwise there is the danger of splits or dulling occurring.
Use in the dishwasher a special rinse for plastics (polycarbonate)
and adhere strictly to the recommended concentration!
Cutter assembly: simply rinse and, if necessary, scrub off. Never place
into water or the dishwasher.
Threaded ring: should be cleaned especially inside, by using a hard brush.

10. MAINTENANCE

- The motor bearings are permanently lubricated and therefore require no maintenance.
- The cutter head bearing is heavily loaded. Replace cutter head when loose or becomes
noisy.
Instruction Manual
Rotor Bar Blender
© Rotor Lips AG
17