Operation - Sony CSP-5000E Bedienungsanleitung

Operation

Proceed as follows to operate the System Controller.
1
Make necessary connections.
See page 8(EN).
2
Turn on the POWER switch.
• After about ten seconds, the system will boot up
and you will hear a buzzer sound.
• All monitors display the scene from the camera
connected to the VIDEO IN 1 terminal (as the
default setting).
• The date and time, the monitor number and the
camera number are displayed (as the default
setting).
Use the CSPK-5000E System Keyboard (not supplied)
to configure the system, program surveillance, and
make other settings.
12(EN)