Bushnell 119598 Bedienungsanleitung Seite 39

DOWNLOADING THE PHOTOS/VIDEOS
To download your photos/videos to a PC or Mac*, first make sure the
WIRELESS Trophy Cam HD power switch is in the OFF position. Connect
the supplied cable to the camera's USB port, then directly to a main USB
port on your computer-do not use front panel/keyboard USB ports or
unpowered "hubs".
The WIRELESS Trophy Cam HD will be recognized as a standard "USB
Mass Storage" device (this may take several seconds the first time you
connect it). If you would rather leave your camera in the woods and just
pull its SD card out, an SD card reader works the same way as described
in this section once the card is inserted and the reader is connected to your
computer.
With Windows XP or later, you can then simply use the options in the pop-
up window to copy, view, or print your photos (right).
On all Windows OS, the WIRELESS Trophy Cam
HD will also be listed as a "Removable Disk" if you
open the "My Computer" window (on Macs, an icon
will appear on your desktop). The WIRELESS Trophy
Cam HD's photo files are named "09020001.JPG"
etc, and are located in the "DCIM\100EK113" folder
on this "Removable Disk". Video file names will end
with ".MOV". You may copy the photos/videos to your hard drive as you
would any file-just copy/paste or drag the file names or icons to your drive
or desktop.
After the photos are copied to your hard drive, you can disconnect the
WIRELESS Trophy Cam HD. (On Mac computers, drag the "disk" that
appeared on your desktop when the camera was connected into your Trash
to "eject" it before disconnecting.) The .JPG format photo files from the
WIRELESS Trophy Cam HD may be viewed and edited with any photo
software you choose to use. The .MOV video files may be viewed with the
Windows Media Player on PCs with Windows 7. If your computer is running
an older version of Windows, or you are on a Mac, and you don't already have
a compatible video player, you can download a free version of the DivX player
from http://www.divx.com/.
39