Medion MD 90071 Bedienungsanleitung Seite 31

Important
Once you convert a drive or partition to NTFS, you cannot simply convert it back to FAT or FAT32. You will
need to reformat the drive or partition which will erase all data including programs and personal files on the
partition.
The following table describes the compatibility of each file system with various operating systems.
NTFS
A computer running Windows XP or Windows
2000 can access files on an NTFS partition. A
computer running Windows NT 4.0 with Service
Pack 4 or later might be able to access some
files. Other operating systems allow no access.
The following table compares disk and file sizes possible with each file system.
NTFS
Recommended minimum volume
size is approximately 10 megabytes
(MB). Volumes much larger than 2
terabytes (TB) are possible. Cannot
be used on floppy disks.
File size limited only by size of
volume.
FAT
Access is available through
MS-DOS, all versions of
Windows, Windows NT,
Windows 2000, Windows
XP, and OS/2.
FAT
Volumes from size up to 4 gigabytes
(GB). Does not support domains.
Maximum file size is 2 GB.
Setting up
FAT32
Access is available only through
Windows 95 OSR2, Windows
98, Windows Millennium Edition,
Windows 2000, and Windows
XP.
FAT32
Volumes from 512 MB to 2 TB. In
Windows XP, you can format a
FAT32 volume up to 32 GB only.
Does not support domains.
Maximum file size is 4 GB.
DE
EN
FR
NL
DK
ES
PT
13