General Introduction; Intended Use; Purpose And Content Of The Manual; Preservation Of The Manual - Palazzetti ECOMONOBLOCCO WT F Serie Bedienungs- Und Wartungsanleitungen

12

General introduction

Palazzetti heating appliances are manufactured and
tested in accordance with the safety requirements set
forth in the reference European directives.
Even partial printing, translation and reproduction of this
manual are bound by the authorisation from Palazzetti.
Technical information, graphical representations and
specifications in this manual may not be disclosed to
third parties.
Do not operate if all the information given in the manual
are not well understood; if in doubt always ask the advice
or the intervention of Palazzetti specialized personnel.
Palazzetti reserves the right to change specifications and
technical and/or functional characteristics of the product
at any time without prior notice.
12.1 Symbols
In this manual the points of major importance are
highlighted by the following symbols:
Indication: Indications concerning the correct use of the
product and the responsibility of the designated persons.
Warning: The point in which a note of particular
importance is expressed.
Hazard: Expresses an important note of behaviour for
the prevention of injuries or damage to properties.

12.2 Intended use

Palazzetti Ecomonoblocco model series WT is an
appliance which must be installed and used only indoor,
suitable for combustion of wood logs for residential
heating, consisting in a structure completely made of
metal, with furnace closed by a ceramic glass.
The fireplace works only with the door of the furnace
closed.
The appliance is not intended to be used by children
under the age of 8 years and by persons with reduced
physical, sensory or mental capacity, or without
experience and knowledge, unless they have received
instructions relating to the safe use of the appliance and
they are under the surveillance of a person responsible
for their safety.
The destination of use indicated is valid only for
appliances in full structural, mechanical and engineering
efficiency.

12.3 Purpose and content of the manual

The purpose of this manual is to provide the fundamental
and basic rules for a correct use and maintenance of
the product.
The strict observance of what is described in it guarantees
a high level of safety and productivity of the fireplace.
22

12.4 Preservation of the manual

Preservation and consultation
This manual must be carefully stored and must be
available at all times for consultation, both on the part of
the user that the installation and maintenance personnel.
The operating and maintenance manual is an integral
part of the appliance.
Deterioration or loss
If needed, request an additional copy to Palazzetti.
Sale of the appliance
In the event of transferring the appliance the user is
obliged to deliver even this manual to the new owner.
12.5 Update of this manual
This manual reflects the state of the art at the time of
placing the product on the market.
The products already on the market with the relevant
technical documentation, will not be considered by
Palazzetti as deficient or inadequate due to possible
modifications, adjustments or application of new
technologies on newly marketed products.
12.6 Overview
The instructions in this manual apply as general rules;
it is still necessary to comply with all the rules laid down
by the local, national and European legislation in force
in the country where the appliance is installed.
Information
In case of exchange of information with the Manufacturer
of the product please refer to the serial number and to
the identification data on the serial number plate of the
product.
Extraordinary maintenance
The extraordinary maintenance operations must be
performed by qualified personnel authorized to intervene
on the product referred to in this manual.
cod. 004777530 MBL - 21/03/2019 - Palazzetti - PN - Italy