Sharp UA-PM50E Bedienungsanleitung Seite 13

MOSQUITO CATCHER
Use this function to catch mosquitoes.
Mosquito catching function (CATCH lamp) will turn on when both UV LIGHT and GLUE SHEET work
properly.
UV Light ON
NOTE
Select Max mode to catch mosquitoes more eff ectively.
The higher the air volume is, the easier to capture mosquitoes becomes.
CATCH lamp
When UV LIGHT lamp is on and GLUE SHEET lamp is on, CATCH lamp is on.
When UV LIGHT lamp is off or GLUE SHEET lamp is fl ashing, CATCH lamp is off .
UV LIGHT lamp
When Mosquito Catcher button is pressed, UV LIGHT lamp is turned on and conversely.
UV LIGHT
off
UV LIGHT
fl ashing
GLUE SHEET lamp
fl ashing
• Flashing Glue Sheet lamp indicates time to change Glue Sheet.
Replace with a new sheet.(Ref.E-15)
Press the Mosquito Catcher button for 3 seconds.
Glue Sheet lamp changes from fl ashing to lighting.
• Glue Sheet lamp fl ashes approx. 2 month (24 hours x 60 days) after you press Mosquito Catcher
button for 3 seconds.
• At the fi rst time of using the product, after inserting the power plug in socket and turning on the
power, Glue Sheet lamp will be fl ashing by default. Install Glue Sheet to catch panel (Ref. E-7),
then press the Mosquito Catcher button for 3 seconds.
• We recommend you to keep this air purifi re working as much as possible to maximize its function
except for exchanging fi lter and Glue sheet.
When Catch Panel comes off, UV light is turned off automatically by
Magnet sensor. Check whether catch panel is properly attached.
When UV LIGHT lamp is flashing, UV Light has failed. Contact the
service centre authorized by Sharp.
Press 3 seconds
E-9
UV Light OFF