Introduction; This User Manual; For Further Information; Symbols Used In This Manual - Breezy Nuage PLS series Bedienungsanleitung

6

Introduction

1 Introduction
Congratulations on choosing a Nuage PLS
seating system for your tilt in space wheelchair.
All of our high-quality mobility products are
designed to enhance independence and make
your everyday life easier.

1.1 This user manual

This user manual will help you to use and
maintain your seating system safely This
user manual is a supplement to our general
wheelchair user manual.
Where necessary this user manual refers to
other manuals as shown below:
Wheelchair: Refers to the general
wheelchair user manual.
Read this user manual and the other user
manuals referred to carefully before using
the product. If one of the user manuals was
not included with your wheelchair, please
contact your dealer immediately.
In addition to this user manual, there is also a
service manual for ualified specialists.
If you are visually impaired, this
document can be viewed in PDF format at
www.SunriseMedical.eu or alternatively is
available on request in large text.

1.2 For further information

Please contact your local, authorised Sunrise
Medical dealer if you have any questions
regarding the use, maintenance or safety of
your wheelchair. In case there is no authorised
dealer in your area or you have any questions,
contact Sunrise Medical either in writing or by
telephone.
For information about product safety
notices and product recalls, go to
www.SunriseMedical.eu

1.3 Symbols used in this manual

Note!
Pointing out possible problems to the user.
Caution!
Advice for the user to prevent damage to the
product.
Warning!
Warnings for the user to prevent personal in
jury.
Not following these instructions may result
in physical injury, damage to the product or
damage to the environment!
Symbols in illustrations
Each illustration includes icons and numbering
to indicate what needs to be done and in which
order.
Loosen by one turn with torx
Tighten by one turn with torx
,
1 2 Step 1, 2 etc.
An arrow, as part of an illustration, indicates
that the component in question moves or needs
to be moved in the direction indicated.
Nuage