Faema E71 E Gebrauch Und Installation Seite 65

coffee
1
Press the icon .
4
When one of the coffee keys is pressed (e.g. the
following parameters are displayed on the services display:
Water dose; pre-infusion time;
The key in question will remain highlighted on the unit
display.
5
6
TEST. By pressing the
and the following screen appears on the services display:
programming measures function
2
Press one of the coffee keys (ex.
Group 3).
key), the
saturation time.
All the parameters can be adjusted by the user:
water dose (using the keys
pre-infusion time (using the keys
saturation time (by pressing the
into allowing the time to be adjusted with the keys
Press the
Press the icon to confirm the information entered.
NOTE ExAMPLE
key, the dispensing starts
21 EN
3
The icons of the programmable keys
are shown on the services display.
NOTE. THE key can also be programmed as DOSED:
press the icon on the parameter display screen:
Press the icon to return to CONTINUOUS mode.
The other functions of the
in both configurations.
);
icon, this will turn
icon to exit the settings menu).
: shows the duration in seconds of the
pre-infusion phase.
shows the duration in seconds of the
saturation phase.
The parameters displayed are:
Dv: Volumetric meter incremental counter
tG: dispensing time
TB: instant coffee boiler temperature
RB: % activation coffee boiler
p: service boiler pressure
Rc: service boiler resistance
Sl: service boiler water level
Evc: service boiler load solenoid valve
key will remain unchanged
);
resistance
.