Attaching the water bottle
Remove the lid from the water bottle. Position
the bottle so that the gas tube protrudes into
the water and then push the bottle up as far
as it will go. Turn the bottle as shown in the
illustration until you feel it engage. Make sure
that the water bottle is firmly in place before
use.
Carbonating water
Important! Never carbonate anything other than pure drinking water, as sugar
or other additives might cause the pressure relief valves to stick, rendering the
machine unsafe to use.
The degree of carbonation is a matter of
personal taste, so for the first few times you
use the machine, you will have to experiment
until you find the degree of carbonation that
is right for you.
To carbonate the water, press the button and
keep it pressed for 3-4 seconds or until you
hear a hiss as the pressure relief valve opens.
Depending on the water temperature, this will
give you a normal degree of carbonation.
You can add more gas as desired by pressing
the button again briefly once or twice.
Release the button and wait until you hear
another hiss as any excess pressure is
discharged and the water bottle is vented.
Unscrew the water bottle and enjoy your carbonated water. Store the water in a
cool place with the lid tightly screwed on to prevent the water going flat.
8