Channel Scan; Call Tones; Roger Beep On/Off; Key-Tone On/Off - Topcom multitalker 1000 Bedienungsanleitung

TOPCOM MULTITALKER 1000

14.9 CHANNEL SCAN

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
• Press and hold
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear
the active signal.
• Press
scan.
When an active signal (one of 8 channels) is detected, press
search for another active channel

14.10 CALL TONES

A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
• Press
• Press
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
CALL

14.11 ROGER BEEP ON/OFF

After the - button is released, the unit will send out a roger beep to confirm that you have stopped talking.
To set the Roger Beep.
• Press
• Press
• Press

14.12 KEY-TONE ON/OFF

When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
10
and briefly to start scanning.
MENU
to communicate through the active signal channel. Press
4 times. CA will be displayed.
MENU
or to select another call tone or select OF to enable call tones.
to confirm your selection and return to the stand-by mode.
5 times. 'ro' will be displayed.
MENU
to enable (ON) or disable the Roger-Beep (OF).
to confirm your selection and return to the stand-by mode.
6 times. 'to' will be displayed.
MENU
to enable (ON) or disable the Roger-beep (OF).
to confirm your selection and return to the stand-by mode.
or to bypass the current channel and continue to
to deactivate channel
MENU
TOPCOM MULTITALKER 1000