General Instructions - Krampouz GGCIO2 Bedienungsanleitung

Dear customer,
Thank you for purchasing one of our products. Although it is very simple to use, we advise you to read these
instructions carefully, as they provide installation and operating information allowing you to achieve the best
results.
Receipt and unpacking:
Any damage due to shipping must be reported to the carrier by registered letter with acknowledgement of receipt,
within 24 hours of receipt. You must also mention your reservations on the carrier receipt and describe the precise
nature of the damage observed upon delivery.
The installation and adjustment operations (injector changes) of this product must be performed by installers or
technicians trained and skilled on gas appliances.

General instructions

When using gas appliances, always take basic safety precautions.
Read all the instructions carefully.
This appliance is intended for professional use.
-
This appliance was designed to operate with butane or propane gas cylinders, but also from a natural gas
-
supply.
Appliances running with natural gas must be laid on a fixed work top. Trolleys are forbidden.
-
The appliance must never be left unattended when in use.
-
The surfaces are likely to become hot during use.
-
Place the appliance on a stable and dry surface, slightly away from the edge and at least 1 m away from
-
any wall and any heat-sensitive element.
Choose a base made from stainless steel or any other flame-proof material complying with hygiene
-
standards.
Keep this appliance away from flammable materials: combustible materials must be located at least 1 m
-
away from the plancha.
Shelter this product from wind when in use.
-
Do not use the appliance for a purpose other than the one it is intended for.
-
The use of accessories not recommended by the appliance's manufacturer may cause accidents.
-
Parts protected by the manufacturer or its assignee must not be handled by the user.
-
Do not move the appliance during operation.
-
Do not touch the hot surfaces.
-
Do not handle the appliance when hot.
-
Leave the appliance to cool down before handling or cleaning it.
-
Do not clean the appliance with a high or low pressure water spray.
-
Do not use chlorinated products to clean stainless steel.
-
If you smell gas, close all valves.
-
Never use a leaky appliance.
-
Any modification of the appliance may be hazardous.
-
Do not use an adjustable pressure regulator.
-
The bottom of the appliance must stay ventilated to allow proper air flow to the burner.
-
Do not obstruct the frame's ventilation inlets and the ventilation holes in the bottom plate under the
-
frame.
Caution: Do not insert aluminium foil or any other material or object between the plate and the frame
-
(ventilation zone).
In the event of a failure, inspection and repairs must be performed by an approved technician.
-
- 13 -