Logic3 WIP015 i-stationttV Bedienungsanleitung Seite 4

recharging the iPhone/Pod
1. Connect the AC adaptor to the i-Station and turn on the mains socket.
2. Dock your iPhone/iPod into the cradle and the iPhone/iPod will begin to recharge (The i-Station Power button does not
have to be turned ON in order to recharge the iPhone/iPod).
3. iPhone/iPod can recharge and play music at the same time when using the AC adapter.
NOTE: Your iPhone/iPod will not charge when using Batteries as the Power Source.
line in Mode
The i-Station also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc and
Portable CD Players to be connected for use as a speaker system.
1. Plug in the line in cable (3.5mm right angle jack - supplied) into the rear of the i-Station Line in Socket.
2. Connect the other end of the line in cable (3.5mm straight jack) to your device.
3. Set your device volume to Maximum.
4. Turn on your i-Station.
NOTE: Remember to remove the line in cable when using the docking station as the line in cable will override
any sound coming from the docking station.
System Specifications
Total 6W Output (3W / Channel)
Mid range (40mm) per satellite
Distortion <=10%
S/N ratio: 65dB@1W
Frequency Response: 200Hz – 16kHz
Provided Power Adaptor:5VDC@2A
trouble shooting
Problem What Should I do?
Check the AC power cable is connected firmly into the AC wall outlet and the
i-Station.
i-Station does not turn ON when powered via
AC Mains
Test the i-Station by powering the unit with 4 x AAA batteries.
i-Station does not turn ON when powered via Test the i-Station by powering the unit via AC Mains, if this works replace the batter-
Batteries ies with new ones.
Ensure the correct cradle is used with your iPhone/iPod.
Ensure the line in cable is not plugged into the i-Station
Check Play status on the iPhone/iPod.
No sound
Please try updating the firmware for your iPhone/iPod using the latest iTunes which
is available from www.apple.com/ipod/download
Check i-Station is not in power save mode. Press any button to exit this mode
If you are using AAA batteries, replace them with new ones.
Sound Quality is poor
Ensure the correct cradle is used with your iPhone/iPod.
6
Ensure the correct cradle is used with your iPhone/iPod.
iPhone/iPod is not recharging
Ensure your i-Station is connected to the AC Mains
Cradle will not fix into the i-Station Remove any previously inserted universal dock cradles
I have lost a part for the i-Station Please refer to the spare parts section in this manual
Go into your iTunes library
1. Highlight all the tracks and click EDIT.
2. Select Preferences and select Playback.
i-Station goes into standby mode when the music
3. Turn the Sound Check ON
is playing on the iPhone/iPod
4. Goto your iPhone/iPod Menu and Turn ON Sound Check.
5. Now re-sync your iPhone/iPod
Now all your songs will be at the same level.
i-Station goes into standby mode when music is Turn the volume level on the audio device to the maximum level, then use the
playing on a audio device connected to the 'line-in' i-Station to control your volume levels
iPhone/iPod not responding Reset the iPhone/iPod (Goto http://www.apple.com/support/)
spare Part list
Part no. Item code Item name
1 YAD022B AC ADAPTOR (WITH INTERCHANGEABLE UK 3PIN PLUG)
2 YAD022E AC ADAPTOR (WITH INTERCHANGEABLE EURO 2PIN PLUG)
3 YAD022U AC ADAPTOR (WITH INTERCHANGEABLE USA PLUG)
Cradles for iPhone/iPhone 3G, touch/touch 2G, classic
4 YCR027
80Gb/120GB/160GB, nano 3G/4G/5G
5 YCB000K LINE IN CABLE (BLACK)
Please use Item Codes above, when searching for Spare Parts on our Website www.logic3.com
For spare Parts and Prices visit our website at www.logic3.com
Should you have any setup problems with the i-StationTTV (WIP015) please contact our Technical Support Hotline on
+44 (01923) 471 000 – National/International call rates apply or Email support@logic3.com - Spare parts are avail-
able for some models at our website www.logic3.com
Price
For prices visit our website at
www.logic3.com
7