Asus RP-N14 Schnellstartanleitung Seite 6

• Enter a name for the new Extender
network.
Option B: Using WPS (Wi-Fi Protected Setup)
1. Press the WPS button on the side of the Range Extender for more than two seconds, until the system
indicator flashes.
2. Press the WPS button on the router within two minutes.
NOTE: Refer to the router's manual for the location of the WPS button.
3. Check if the Range Extender's system indicator turns
into solid blue, which indicates that the Range Extender
has connected to the wireless network successfully. The
Range Extender's wireless network name (SSID) changes
to your existing Wi-Fi network name, ending with _RPT.
For example:
Existing network name: existing NetworkName
New network name: existing NetworkName_RPT

WEU8662_RP-N14_QSG.indb 6
• Connect your wireless devices to the new Extender
network.
24/09/13 16:51:15