Setting Up The Rinsing Program - KKT KOLBE GSI452ED Benutzerhandbuch

Rinsing programs
The Washing program „ECO" is „medium" for the flushing of
!
the suitable soiled dishes and most efficient in terms of com-
bined energy and water consumption.
The fair values of the washing program are a guideline only. Cir-
cumstances that are not dependent on the device, for example
the temperature of the supplied water, the water pressure, etc.,
may affect the overall duration of the wash cycle.
* Default program, according to the test cycle.

4.1 Setting up the rinsing program

Make sure that notes from the first section have been complied
with „before first use".
1. Draw out the lower and upper basket, load the dishes and push
them back. It is commended to load the lower basket first, then
the upper one (see the section entitled "Loading the Dish-
washer").
2. Pour in the detergent (see the section entitled „Salt, Detergent
and Rinse Aid").
3. Insert the plug into the socket. The power supply is 220-240 V AC /
50 HZ, the specification of the socket is 12A 250V AC.
Make sure that the water supply is turned on to full pressure.
4. Close the door with a little force to ensure it is properly closed.
Note: A click can be heard if it is closed perfectly
5. Press the power switch and then select your desired programme
by pressing the programme selection button (See section washing
programs: overview).
6. When the washing is over, you can shut off the appliance by pres-
sing the On/Off switch.
58