Electromagnetic Fields (Emf); Before First Use - Philips AC4002 Benutzerhandbuch

ENGLISH
8
2
1
- The appliance is only intended for household use
under normal operating conditions.
- Do not use the appliance in wet surroundings or in
surroundings with high ambient temperatures, such
as the bathroom, toilet or kitchen.
- The appliance does not remove carbon monoxide
(CO) or radon (Rn). It cannot be used as a safety
device in case of accidents with combustion
processes and hazardous chemicals.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.

Before first use

Placing the filters
The appliance comes with all filters fitted inside, but you have to remove
the packaging of the filters before you can use the appliance. Remove all
filters, unpack them and place them back into the appliance as described
below.
Tip: Place the appliance against a wall for more stability when you remove or
insert filters.
Note: Make sure you insert the filters in the correct position.
1
Place your fingers in the recesses of the side panels and gently pull the
bottom of the front panel towards you. Then lift the hooks at the top
of the panel out of the top of the appliance.
2
To remove the pre-filter, grab the two projections and pull the filter
towards you.
3
Remove all other filters from the appliance.