Care & Cleaning - Sage the Barista Touch SES880 Kurzanleitung

Care & Cleaning
COLOUR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean to ensure that the machine functions properly.
REPLACING THE WATER FILTER
1 2 2
Set current month Soak Filter
(refer to p7)
The provided water filter helps prevent scale build-up in and on many of the inner functioning components.
Replacing the water filter after three months or 40L will reduce the need to descale the machine.
The limitation of 40L is based on water hardness level 4. If you are in level 2 area, you can increase
this to 60L.
NOTE
To purchase water filters visit Sage
CLEANING CYCLE
There will be a message prompt when a cleaning
cycle is required. This is a back-flushing cycle
and is separate from descaling. Follow the
instruction on the screen.
DESCALING
After regular use, hard water can cause mineral
build up in and on many of the inner functioning
components, reducing the brewing flow, brewing
temperature, power of the machine, and taste of
the espresso. Even if you used the provided water
filter, we recommend you to descale if there is
scale build-up in the water tank.
Go to 'Settings' and select 'Descale cycle'. Follow
the instructions on the screen.
14
3 4
Assemble water Ensure parts are
filter parts connected
webpage.
®
5 6
Install filter Install water tank
in tank
WARNING
Do not immerse power cord, power plug or
appliance in water or any other liquid. The water
tank should never be removed or completely
emptied during descaling.
!
Replace filter after
90 days or after 40L