Wiseup WIFI02 Benutzerhandbuch Seite 3

4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to the WIFI or WLAN setting page on your phone or mobile device, connect to
the camera's WIFI signal named "MD81S". The WIFI signal password is "12345678". Wait
for the WIFI to be connected.
[Note]:
If the camera's WIFI signal cannot be found after a long time, please see Q1 on the FAQ
page at the end of this user guide for detailed solutions.
4.2.2. For Android users, launch the "Plug&Play" APP. For IOS users, run the
"P2PCamViewer" APP.
4.2.3. Tap "LAN" or "Local Cameras" at the bottom of the screen. The camera will pop up
in a few seconds. If the camera shows "Online", it means the P2P (LAN) setup is
successful and you can check or record video in P2P (LAN) mode.
[Note]:
In this P2P (LAN) mode, you can only view video locally, within 10 meters (33 feet) open range.