Control Elements - Waeco PerfectView M59L Montage- Und Bedienungsanleitung

_M59L_EB_10s.book Seite 41 Dienstag, 22. Januar 2008 4:59 16
PerfectView
6.2

Control elements

The following control elements are located at the front of the monitor:
No. in
fig. 7, page 5
1
2
3
4
5
6
7
8
Label Meaning
STANDBY Switches the power supply on/off (standby)
UP This button has three functions:
normal mode: increase volume
after calling up the menu: change a setting within a
function (e. g. contrast)
when in reverse gear: move the distance markers
upwards
DOWN This button has three functions:
normal mode: decrease volume
after calling up the menu: change a setting within a
function (e. g. contrast)
when in reverse gear: move the distance markers
downwards
SELECT This button has three functions:
press briefly: select video source (CA1
→
AV
after calling up the menu: select functions (e. g. pic-
ture setting)
press for longer: switches the camera number dis-
play ("CAM1" or "CAM2") and the time display (nor-
mal mode) on or off
MENU This button has two functions:
press briefly (in normal mode): activate dimmer
function
press for longer: call up menu
You can call up four menus. Press the button
again to call up the individual menus.
– PICTURE/BILD: picture setting (e. g. brightness)
– USER/NUTZER: select system function (e. g.
language)
– TIME/UHRZEIT: set date and time
– INSTALL/AUSWAHL: select application (e. g.
mirror function)
– Infrared receiver
– LED standby display
– Socket for the monitor cable of the connection box
Technical description
CA1 ...)
→ →
CA2
41