Auto Restart - Sharp UA-HD60E Bedienungsanleitung

TROUBLESHOOTING
SYMPTOM
When the Roller / Float / Tray partition was
removed.
FLOAT
1. Insert the fl oat
under this tab.
3. Insert the tab on the
other side of the fl oat
into the hole.

AUTO RESTART

After a power failure, automatically resume
the operation when the power recovers.
ON
(with the unit OFF)
(simultaneously for more than 3
sec.)
2. Inner the tab
of fl oat into
the hole.
Tab
Cross-Section view
If the ,
for 10 seconds, the setting is
complete.
REMEDY (not a malfunction)
• Install the Roller / Float / Tray partition in order
below.
Tray partition
Humidifying tray
ROLLER
Fix the roller in the tray from side way.
Float
Float
Auto Restart can be set.
• Even when the plug is unplugged or the breaker is
thrown during the operation, the operation resumes
at the previous operation mode and settings if the
power recovers.
CANCELLATION
(with the unit OFF)
(simultaneously for more than 3
sec.)
, lamp lights up
E-18
Click