Menu
16
4.3.12 Bit/Parity (12th menu option / see overview and notes in Section 4.1)
Note: This menu option is only available if the "Printer" or "Host" setting was selected in the 8th menu option (Peripheral unit)!
It sets the character format for the peripheral device connected to the balance.
7b-E
"
"
"
"
"
7b-no
8b-no
7b-odd
4.3.13 Handshake (13th menu option / see overview and notes in Section 4.1)
Note: This menu option is only available if the "Printer" or "Host" setting was selected in the 8th menu option (Peripheral unit)!
This function is used to select the data transfer mode to suit different serial devices.
HS oFF
"
"
"
"
"
HS SoFt
HS HArd
7b–E
7 data bits/even parity
7b–no
7 data bits/no parity
8b–no
8 data bits/no parity
7b–odd
7 data bits/odd parity
HS oFF
No handshake
HS SoFt
Software handshake (XON/XOFF)
HS HArd
Hardware handshake (DTR/CTS)