Installation Of The Base And Recharging Your Robot; Automatic Charging; Manual Charging - E.zicom e.ziclean SLIM Serie Benutzerhandbuch

5. Installation of the base and recharging your robot

A. AUTOMATIC CHARGING

Install the charging base in a flat area against a wall.
 Make sure to respect the lateral and frontal areas identified below:
Correct positioning of the charging base will facilitate the anchoring of the robot vacuum cleaner
anchoring phase upon returning to its charging bases.

Connect the charging base to its power supply. Consider passing the wire along the wall to avoid
the risk of it getting tangled with the robot vacuum.
B. MANUAL CHARGING
It is possible to connect the power cable directly to the robot vacuum cleaner. The battery charge
time is approximately 4 hours.
When charging your e.ziclean ® SLIM SERIES robot vacuum for the first time, we recommend that
you perform a full reload of the device for a period of 8 hours.
11
.EN.