Section 2-Initial Setup; Initial Set Up Of Compressor; Choosing A Location - Invacare HomeFill II IOH200AW Bedienungsanleitung

SECTION 2—INITIAL SETUP
SECTION 2—INITIAL SETUP
NOTE: Suppliers Only - Refer to Dealer Information on page 9
prior to performing this procedure.

Initial Set Up of Compressor

Compressor Initial Setup Checklist
Before operating the HomeFill II Compressor for the first
time, complete the following checklist:
❑ Choose a location for the compressor.
❑ Transport the compressor to the desired location.
❑ Connect the power cord to the compressor.
❑ Connect the compressor to the concentrator.

Choosing a location

WARNING
NEVER use near any type of flame or flammable/explosive
substance, vapour or atmosphere.
Keep the oxygen tubing, cord, and unit away from heated
or hot surfaces, including space heaters, blankets, cookers
and similar electrical appliances.
The compressor should be at least three inches away from
walls, curtains or furniture to ensure sufficient air flow.
DO NOT use inside a cupboard.
The compressor should rest on a hard flat stable surface, such
as a table or the Ready Rack.
Part No 1145804 15 HomeFill II Compressor
®