ZyXEL V500 Serie Schnellstartanleitung Seite 14

FIELD
7 SIP Register
Port
8 SIP Service
Domain
9 SIP Auth ID
10 Auth Password This is the password for this SIP account.
11 Codec Priority
12 Voicemail
Number
13 DNS SRV (Off) Turn this on (select On) to have the V500 use the DNS servers you
14 Call ID
15 NAT Setting
16 Backup SIP
Server
5 When you are done configuring SIP 1
Configuration, press Back. The upper right
part of the LCD screen displays the SIP account
name you registered ("SIP1", in this example).
6 See section 3 for how to test your V500's
configuration by making a call.
If your SIP account does not register successfully (Unused or No Reg is
still displayed in the main screen) or you cannot make a call, check your
connections and re-enter your SIP settings. Restart the V500 (turn the
power off, then back on). If this does not help, contact your network
administrator or VoIP service provider.
DESCRIPTION
This is the port the SIP register server uses to register the V500. The
default is 5060.
If you have a SIP account like 1234567@voip-provider.com, the
SIP Service Domain is voip-provider.com.
This is the user name for this SIP account.
Your V500 and the SIP server must use the same voice codec (coder /
decoder). Select the codecs you want the V500 to try using first, second
and third.
This is the number you enter to access your voicemail messages for this
SIP account.
configured in section 2.1.2. Turn it off (select Off) if you do not want the
V500 to use DNS. DNS SRV is off by default.
Use this to turn outgoing caller ID on (On) or off (Off).
Use this to configure Network Address Translation.
Use this to set up the SIP server(s) the V500 uses if it cannot access the
main SIP server.
ENGLISH
11:45 2008-12-12
ZyXEL
14
SIP 1
Unused
Unused
Unused