Care And Transport; Transport; Storage; Cleaning And Drying - GeoMax Zoom3D Gebrauchsanweisung

3

Care and Transport

3.1

Transport

Transport in the field
Transport in a road
vehicle
Shipping
Shipping, transport of
batteries
Field adjustment
3.2

Storage

Product
Field adjustment
Li-Ion batteries
3.3

Cleaning and Drying

Housing and Optical
Components
Damp products
Cables and plugs
Care and Transport
When transporting the equipment in the field, always make sure that you
• either carry the product in its original transport container,
• or carry the tripod with its legs splayed across your shoulder, keeping the attached product upright.
Never carry the product loose in a road vehicle, as it can be affected by shock and vibration. Always carry
the product in its transport container, original packaging or equivalent and secure it.
When transporting the product by rail, air or sea, always use the complete original GeoMax packaging,
transport container and cardboard box, or its equivalent, to protect against shock and vibration.
When transporting or shipping batteries, the person responsible for the product must ensure that the
applicable national and international rules and regulations are observed. Before transportation or shipping,
contact your local passenger or freight transport company.
Periodically carry out test measurements and perform the field adjustments indicated in the User Manual,
particularly after the product has been dropped, stored for long periods or transported.
Respect the temperature limits when storing the equipment, particularly in summer if the equipment is
inside a vehicle. Refer to "4 Technical Data" for information about temperature limits.
After long periods of storage inspect the field adjustment parameters given in this user manual before
using the product.
• Refer to "Technical Data" for information about storage temperature range.
• Remove batteries from the product and the charger before storing.
• After storage recharge batteries before using.
• Protect batteries from damp and wetness. Wet or damp batteries must be dried before storing or use.
• A storage temperature range of 0°C to +30°C / +32°F to +86°F in a dry environment is recommended
to minimize self-discharging of the battery.
• At the recommended storage temperature range, batteries containing a 40% to 50% charge can be
stored for up to one year. After this storage period the batteries must be recharged.
• Blow dust off housing and optical components such as lenses or windows.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth with water or pure
alcohol. Do not use other liquids; these may attack the polymer components.
Dry the product, the transport container, the foam inserts and the accessories at a temperature not
greater than 40°C/104°F and clean them. Do not repack until everything is dry. Always close the transport
container when using in the field.
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.
en
Zoom3D | 14