System Map: Front, Left, Right & Rear Views (Model C)
3
2
4
13
11
12
Figure 12 - Front, Left, Right & Rear Views (Model A)
1. LED Indicators
2. Security Lock Slot
3. DC-In Jack
4. RJ-45 LAN Jack
5. Mini DisplayPort 1
6. Mini DisplayPort 2
7. HDMI-Out Port
8. USB 3.0 (USB 3.1 Gen 1) Type-C Port
Or
(Factory Option) USB 3.1 Gen 2 Type-C Port
9. USB 3.0 (USB 3.1 Gen 1) Type-A Port
Or
(Factory Option) USB 3.1 Gen 2 Type-A Port
16
Front
Left
8
9
7
5
6
Right
14
15
Rear
10. Multi-in-1 Card Reader
11. Headphone-Out Jack
12. Microphone-In Jack
13. USB 2.0 Port
14. USB 3.0 (USB 3.1 Gen 1)
Type-A Port
15. Vent
1
10
15
Mini DisplayPorts
External displays can be config-
ured either using the Intel HD
Graphics Control Panel or by
the Project menu (press
+ P
or Fn + F7).
If you wish to configure an exter-
nal display connected to Mini
6
DisplayPort 2
you must use
Project menu to control the dis-
play configuration.
USB 3.1 Gen 2
Note that when a single USB de-
vice is plugged in to a USB 3.1
Gen 2 port the data transfer
speed will be 10Gbps, however
when two devices are plugged in
to both USB 3.1 Gen 2 port ports,
this bandwidth will be shared be-
tween the ports.
Overheating
To prevent your computer from
overheating make sure nothing
blocks any vent while the comput-
er is in use.