Installing The Charger - Samsung SR8987 Benutzerhandbuch

Installing the charger

Power lamp Power lamp
1. Install the charger on a fl at surface.
2. There should be no obstacles and cliffs 0.5m to the left and
right and within 1 m of the front.
3. Install the charger in a location where it can be easily accessed by
the vacuum cleaning robot.
4. Arrange the power cord along the wall.
5. When the fl oor is made of wood, install the charger in the same
direction as the grain of the wood.
Always keep the power cord of the charger plugged
into the power outlet.
NOTE
- If no power is supplied to the charger, the vacuum
cleaning robot will not be able to fi nd the charger and will
not be able to charge automatically.
- If the vacuum cleaning robot is separated from the
charger, the battery is automatically discharged.
Charging lamp Charging lamp
operating _21