Using Usb Mode - Changhong LED22D1000S Bedienungsanleitung

Menu Operation

Using USB mode

• To Access/Quit USB mode
1. Connect an USB device.
2. Press SOURCE button to display the main menu. Use the ▲/▼ to highlight USB,
and the ENTER button to access the USB mode.
3. You may also use the signal source selection menu to exit from the USB mode.
NOTE:
Special USB device may be not or well supported.
USB max. Load: DC5V 500mA
• The formats supported
The USB function can support the USB device with USB memory.
It can play Photo, Music, Movie or Text files.
Photo Format Support: JPEG, BMP, PNG.
Music Format Support: MP3, AAC, M4A.
Movie Format Support: AVI, DAT, MPEG -1 / MPEG-2 / MPEG-4, TS/TP.
Text Format Support: TXT.
NOTE:
• Special algorithm documents may not be or well be supported by the USB.
• The USB supports the format mentioned above, if the file format is not supported,
change it to the given format.
• Main Operating Interface
Use the ◄/► button to select Photo, Music, Movie or Text. Press ENTER button enter
into submenu.
Press the ▲/▼ button to select disk you want to watch, and then press ENTER button
to enter.
Press the CH+/CH- button to change page.
Press the red button to delete a photo/music/movie/text.
Press the green button to change display mode (in photo mode).
Use the ▲/▼ buttons to highlight the folder, and then press the ENTER button.
Use the ▲/▼ buttons to highlight a file, and then press the
Press the ENTER button to access to the quick menu.
Press the to stop the playing files.
Press the EXIT button to back to the previous menu.
22
button to play.