Operation; Power-Up Display; Interrupting Operation; Canceling Mistakes - Amana RFS511MP Serie Handbuch

Operation

Power-up Display

After equipment is plugged in, display shows 4 large
dashes and 1 small dash. Open and close oven door to
clear display and activate pads.
- - - -

Interrupting Operation

• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
(START) pad to resume oven operation.
• Press (RESET) pad to interrupt operation. Display
continues to show countdown time. Press
(START) pad to resume oven operation and
countdown timing.

Canceling Mistakes

• If oven is not operating, press
clear display.
• If oven is operating, press
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press

Preprogrammed Times and Cook Level

All preprogrammed pads arrive set at full power.
Pad
1
2
3
4
5
6
7
8
9
0
-
(RESET) pad to
(RESET) pad once to
(RESET) pad to clear display.
Heating Time
10 seconds
20 seconds
30 seconds
45 seconds
1 minute
1 minute 30 seconds
2 minutes
3 minutes
4 minutes
5 minutes

Operating Preprogrammed Pads

Equipment has 10 preprogrammed number pads.
Instructions are written for factory programmed ovens.
Ovens that are reprogrammed can respond differently
than described below.
1. Open oven door, place food in oven, and close
oven door.
• Display shows
• Fan and light operate.
• If pad is not pressed in 30 seconds, open and
close oven door again.
2. Press desired number pad.
• Oven operates and time counts down.
• Display shows
is present.
• Display counts down cooking time.
• If additional heating time is required, press
preprogrammed pads before or after heating cycle
ends.
3. Oven stops heating and oven signal sounds when
heating timing elapses.
8
.
only when microwave energy