Appendix; Replacing The Bulb; Cleaning - LIVARNOLUX LSL 33 A1 Bedienungsanleitung Und Serviceinformationen

Halogen Desktop Lamp LivarnoLux LSL 33 A1

Appendix

Replacing the Bulb


After the lamp has cooled down, loosen the three
screws inside the lamp shade (1) using a suitable
Phillips screwdriver.

Remove the protective glass.

Carefully pull the bulb out of the socket.

Insert a new bulb of the same type. Use a soft, lint-
free cloth.

Place the protective glass over the reflector and
tighten the three screws. All three clips located below
the screws must fix the protective glass in place.

Cleaning

To clean the lamp use a dry cloth. Never use any solvents or
cleaners that may damage the plastic housing. Make sure
that no liquid gets into the housing. If the lamp is very dirty,
use a slightly moistened cloth.
10 - English