Preparing For First Use - Boneco E2441A Gebrauchsanweisung

12

PREPARING FOR FIRST USE

en
UNPACKING
1. Remove the BONECO E2441A evaporator with its plas-
tic bag from the box.
2. Place the BONECO E2441A evaporator on the floor or
a flat, even surface.
Note that there must be a minimum clearance of
30 cm to the wall and 120 cm above the unit.
120 cm
30 cm
FILLING DIRECTLY
1. Pour clean, cold tap water into the fill opening of the
BONECO E2441A evaporator.
2. The maximum capacity is 3.8 liters. Stop adding water
as soon as you can see the fill level ring:
FILLING INDIRECTLY
1. Lift off the upper part.
2. Remove the water base together with the float body.
3. Directly fill the water base with fresh, cold water.
4. Stop adding water as soon as it has reached the maxi-
mum filling limit. The maximum capacity is 3.8 liters.