Interrupt/Cancel Cooking Or Defrosting Processes; Heating And Cooking; Microwave Operation; Fire Hazard - Silvercrest SMW 900 EDS B2 Bedienungsanleitung

Interrupt/cancel cooking or defrosting
processes
Press the Stop button e
•
to interrupt a cooking or defrosting process. The
appliance interrupts the process and stops count-
down of the remaining time. Press the Start/quick
start button r
Press the Stop button e
•
a cooking process. The appliance reverts to
standby mode.

Heating and cooking

Note
This microwave is equipped with a cooling function.
This means that the machine fan continues running
for about 3 minutes after a cooking or grill process
which takes at least two minutes. This is not a mal-
function of the appliance! The rapid cooling helps
to prolong the life of the appliance.

Microwave operation

Note
During the cooking process, drops of water can
form on the oven door or on the housing. This is
normal and is not an indication of a malfunction.
When the appliance has cooled down, wipe the
moisture off with a dry cloth.

Fire hazard!

NEVER use the grill stand t or other metallic ob-
jects when you are using the appliance in the micro-
wave mode. Metals reflect the microwave radiation
and it leads to the generation of sparks. This could
cause a fire and irreparably damage the appliance!
, once in order
to continue the process.
twice to cancel
Selecting the operation level
Press the Microwave button 6
1.
(900 W power) appears in the display 1.
2. Now set the required power level using the
rotary knob r
Press the Start/quick start button r
3.
to confirm the power level you have set.
Programming the cooking time
After you have selected the power level, programme in
the desired cooking time:
Turn the rotary knob r
•
cooking time has been set.
The stages for the rotary knob r
times are as follows:
• from 0 sec to 5 min: in 10 second increments
• from 5 to 10 min: in 30 second increments
• from 10 to 30 min: in 1 minute increments
• from 30 to 95 min: in 5 minute increments
Aborting/stopping an input process
Press the Stop button e
and exit an input process. The appliance reverts to
standby mode.
Starting the cooking process
When you have set the power and cooking time,
you can start the cooking process:
Press the Start/quick start button r
the cooking process.
The symbol for microwave operation
in the display 1. The set time will now count down
backwards. Once the set time has expired, "End"
and "Hot" are shown alternating in the display 1.
A signal tone is heard repeatedly.
- 59 -
. "900"
.
until the required
setting
once to cancel
to start
appears