Intended Use; Installation - VWR VisiCam 3.0 Betriebsanleitung

USB 2.0 interface
CD-ROM drive (to install drivers & software )

Intended use

VisiCam cameras can be mounted on all Biological and Stereo Microscopes equipped with trinocular tube.
It can be mounted also on monocular and binocular Microscopes thanks to the eyepiece adapter. It allows
an easy connection to any USB 2.0 port of a personal computer to acquire, store and edit images from
your Microscope.

Installation

Installation of Camera and Drivers
Remove all the parts from their package. Remove the camera protective cap (leave the black ring in
position).
30 mm Ring
If you have a trinocular microscope then screw the C-Mount adapter (included) to the camera black ring.
Put the C-Mount screwed to the camera onto your microscope trinocular tube.
If you have a binocular or monocular microscope, then screw the 0.5x eyepiece adapter (included) to the
camera black ring. Put the eyepieces C-Mount screwed to the camera onto your microscope binocular or
monocular tube (you must remove one eyepiece).
NOTE:
If the diameter of your microscope eyepiece is 30mm diameter (for example as in stereo
Microscopes), then you must use the 30mm ring (included) together with the 0.5x eyepiece adapter.
NOTE:
the eyepiece adapter has a knurled ring included. It is not necessary to mount this one between
the camera and the adapter if a similar knurled grid is already mounted on the camera.
1. Insert the DRIVER installation CD-ROM into your CD-ROM driver.
2.
Connect the camera to your PC USB port
3. Windows will detect the new hardware and display the installation wizard window. Select "No, not
0.5x Eyepiece Adapter
Knurled Ring C-CS
C-mount adapter
VisiCam digital cameras - 3