Integration Into A Wifi Network - Miele XKM 3100 W Handbuch

Make sure there is sufficient signal
strength for your Wi-Fi network
where the washing machine or
tumble dryer is installed.

The XKM 3100 W module must
be fitted.
There are a number of ways of connect-
ing your washing machine or tumble
dryer to your WiFi network.
1. Connect via the
Miele@mobile App
The Miele@mobile App can be used to
connect to your network.
 Install the Miele@mobile App on your
mobile device.
 Follow the instructions in the App as
well as the fitting and installation in-
structions supplied with the XKM
3100 W module.
To log in using the App you will need:
1. Your WiFi network password
2. The password for your washing ma-
chine or tumble dryer.
The password for your washing ma-
chine or tumble dryer consists of the
last nine digits on the serial number.
This can be found on the appliance's
data plate.
en - Integration into a WiFi network
Tumble dryers
Washing machines
2. Connect via WPS
Pre-requisites:
– You must have a WPS (WiFi pro-
– The WiFi module must be inserted
– The washing machine or tumble
 Follow the fitting and installation in-
structions supplied with the XKM
3100 W module.
If the connection fails, you have prob-
ably not connected WPS to your router
quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the
Miele@mobile App.
tected setup) compatible router.
in the module shaft.
dryer must be switched on.
31