After Taking Pictures (Storage) - FujiFilm WP-FXF200 Bedienungsanleitung

After Taking Pictures (Storage)

1
Turn the camera off.
2
At the end of shooting, immediately fill a container with fresh water to
wash off the salty sea water.
3
Wipe off the water droplets carefully from the waterproof case.
Press the "ON/OFF" button to turn the
camera off.
Make sure that the camera is turned off.
Rinse the outside of the waterproof case
well by stirring the water by hand.
If any salt remains on the case, it can
cause rust, local malfunctioning, and
other problems.
In particular, carefully wipe away the
droplets from the joint of the waterproof
case.
Use a soft, lint-free piece of cloth or
something similar.
Remove the water droplets from under
the Shutter button, the open/close knob
and the others.
EN-19