DeWalt D28700 Anleitung Seite 26

E N G L I S H
17 Do not abuse cord
Never carry the tool by its cord. Never pull the
cord to disconnect from the socket. Keep the
cord away from heat, oil and sharp edges.
18 Store idle tools
When not in use, tools must be stored in a dry place
and locked up securely, out of reach of children.
19 Maintain tools with care
Keep the tools in good condition and clean for
better and safer performance. Follow the
instructions for maintenance and changing
accessories. Keep all handles and switches dry,
clean and free from oil and grease.
20 Repairs
This tool is in accordance with the relevant safety
regulations. Have your tool repaired by an
authorised D WALT repair agent. Repairs should
E
only be carried out by qualified persons using
original spare parts; otherwise this may result in
considerable danger to the user.
Additional safety instructions for chopsaws
• Always wear regular working gloves while
operating this tool.
• Keep hands away from the cutting disc. Never
cut workpieces that require manual action closer
than 15 cm from the rotating cutting disc.
• Do not cut workpieces less than 1.2 mm in
thickness when using the cutting disc supplied
with this tool.
• Do not operate this tool without guards in place.
• Do not perform any operation freehand. Use the
material clamp to clamp the workpiece securely.
• Never reach in the back of the cutting disc.
• Always position the tool on a flat, stable surface
that is well maintained and free of loose
materials, e.g. chips and cut-offs.
• Before using, inspect the cutting disc for cracks
or flaws. Discard the cutting disc if a crack or
flaw is evident.
• Make sure the cutting disc is not contacting the
workpiece before the tool is switched on.
• In operation, avoid bouncing the cutting disc or
giving it rough treatment. If this occurs, stop the
tool and inspect the cutting disc.
• Do not operate the tool while standing in line with
the cutting disc. Keep other persons away from
the work area.
26
• Be aware of cutting chips and the material being
cut. They may be sharp and hot. Allow cut off
parts to cool before handling.
• The spark deflector becomes hot during use.
Avoid touching or adjusting the spark deflector
immediately after operation.
• Switch off the tool and wait for the cutting disc to
stop before moving the workpiece or changing
the settings.
• After switching off, never attempt to stop the
cutting disc by pressing against the side of the
disc.
• Do not use cutting fluids. These fluids could
ignite or cause electrical shock.
• Check that the workpiece is properly supported.
• Use the cutting discs recommended by the
manufacturer only. Never use circular saw blades
or any other types of toothed blades.
• The max. allowable speed of the cutting disc must
always be equal to or greater than the no-load
speed of the tool specified on the nameplate.
• Do not use cutting discs that do not conform to
the dimensions stated in the technical data.
• Ensure that the cutting disc is mounted correctly
before use.
• Let the tool run at no-load in a safe position for at
least 30 seconds. If there is a considerable
vibration or if any other defect occurs, stop the
tool and check it to determine the cause.
• Do not use cutting discs for side grinding.
• Do not cut concrete, brick, tile or ceramic materials.
• Do not cut wood, plastic or synthetic materials.
• Do not cut cast-iron materials.
• Never cut magnesium materials.
• Do not cut electrically live material.
• Use this tool in a well-ventilated area. Do not
operate the tool near flammable liquids, gases or
dust. Sparks or hot chips from cutting or arcing
motor brushes may ignite combustible materials.
• Regularly clear the ventilation slots when working
in dusty conditions. If it should become necessary
to clean the slots, remember to unplug the tool
first.
• Always store cutting discs well-protected and in
a dry place, out of reach of children.
• Warning! Use of this tool can generate dust
containing chemicals known to cause cancer,
birth defects or other reproductive harm.
Use appropriate respiratory protection.