Replacing A Lamp - Sony KL-X9200J Bedienungsanleitung

Replacing a lamp

If the screen becomes dark, the color looks unusual, or
the LAMP indicator on the front of the monitor flashes,
it is time to replace the lamp with a new one.
Disposal of the Used Lamp
Sony regards protection of the environment as
extremely important.
Kindly put the used lamp in the new lamp's package
and send it to the sales company whose address
appears on the new lamp's guaranty card.
Before replacement
• Be sure to use a Sony XL-100 series lamp unit (not supplied)
for replacement. Use of other lamps may damage the monitor.
• Do not remove the lamp for any purpose other than
replacement.
• When replacing the lamp, let it cool down completely as the
surface of the lamp remains extremely hot for at least 30
minutes after the power has been turned off.
• Do not leave the removed lamp near flammable materials.
• Do not pour water onto the removed lamp, nor put any object
inside the lamp.
• Do not put inflammable materials and metal objects inside the
lamp receptacle on the monitor, after removing the lamp. Do
not touch the receptacle.
• Fit the new lamp securely, otherwise the screen may become
dark, or it may cause a fire.
1
Turn off the power switch on the monitor
and unplug the power cord.
Wait at least 30 minutes to allow the lamp to cool
down before replacing it .
2
Remove the front panel.
Hold the monitor tightly.
28 -GB
Additional Information
Grasping the right end of the
front panel with your fingers, pull
the panel towards you. Repeat
this step with the left end of the
panel. Be careful not to catch
your fingernails.
3
Loosen the screw with a coin or similar
object to remove the lamp cover.
4
Loosen the two screws that secure the
lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never
touch the front glass of the lamp or the
surrounding parts.
Loosen the two screws with the hexagon
head wrench (supplied with the lamp).
Hold the handle and pull out straight
towards you.
Place the removed lamp into the empty box of the
replacement lamp.
5
Mount the new lamp and tighten the two
screws securely using the hexagon head
wrench.
6
Mount the lamp cover and tighten the
screw.
7
Mount the front panel.
Be careful not to damage the monitor's speakers.
Notes
• Do not touch the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
• Be sure to attach the lamp securely; otherwise, the monitor will
not turn on.
• A loud sound may be heard when the lamp burns out. This is
not dangerous.
• Consult your Sony dealer for obtaining the following lamp
units:
XL-100 (for Japan)
XL-100U (for the U.S.)
XL-100E (for Europe)
XL-100M (for all other areas)