Installation Using The Factory Default Ip Address - Philips LFH 9160 Benutzerhandbuch

E Tip: It is good practice to make a note of the location and network socket number of each
LAN Docking Station before they are deployed. You can enter this information into the
comment field of the LAN Docking Station configuration interface, which will make it easier to
troubleshoot and maintain LAN Docking Stations in your network. See
the LAN Docking Station
2.2

Installation using the factory default IP address

If your network does not have a DHCP server, follow these steps to install a new LAN Docking
Station:
Connect the LAN Docking Station to the main power supply with the included Philips power
1
supply.
Connect the LAN Docking Station to a free network socket using the RJ45 network cable.
2
Slide a Digital pocket Memo 9600 or 9620 into the docking slot of the LAN Docking Station.
3
Press and hold the
4
simultaneously for 3 seconds. The LAN Docking Station will be configured to use the static IP
address 192.168.109.1 (subnet mask 255.255.255.0).
Configure the network connetion settings of your PC to use a static IP address like
5
192.168.109.xxx and subnet mask 255.255.255.0 for the network socket that is used to
connect the LAN Docking Station.
Open a Web browser on your PC and enter
6
Your user name and password is required. Leave the
7
‚administrator' in the
Change the IP address of the LAN Docking Station according to your network policy. See
8
Assigning a static IP address
Make any additional configuration changes as you see fit. See
9
information.
D Note: This procedure resets all configuration settings of the LAN Docking Station to their
factory defaults.
Important: If installing several LAN Docking Stations, be sure to change the IP address of
C
the LAN Docking Station before connecting the next one to the network. Failure to do so
will result in IP address conflicts, making the configuration interface of the LAN Docking
Station inaccessible.
User manual
on page 16 for more information about assigning comments.
FUNCTION and the
PASSWORD field.
on page 14 for more information.
MENU button on the Digital Pocket Memo
http://192.168.109.1
USER NAME
Configuration
Assigning a comment to
in the address field
field empty and enter
on page 8 for more