Task 4: Creating A Logical Drive - Promise Technology SUPERTRAK TX8650 Kurzanleitung

Task 4: Creating a Logical Drive

You can use the SuperBuild™ Configuration Utility to create a logical drive with
the attached physical drives. You can also use WebPAM PRO and the Command
Line Interface (CLI) to create your logical drives.
1. Boot your system. If this is the first time you have booted with the SuperTrak
card and physical drives installed, the SuperTrak BIOS will display the
following screen.
2. Press the Ctrl-S keys to display the SuperBuild Utility Main Menu.
For an explanation of the logical drive concepts and the choices
you can make when you create your logical drive, see Chapter 7
of the SuperTrak User Manual on the Software CD.
SuperTrak Installation Task List
Note
9