Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software Installation
SOFTWARE INSTALLATION
Windows XP
Follow these instructions to install the 0202 software and E-MU Production Tools
software bundle on a Windows XP computer.
Connect the 0202 USB 2.0
1. First connect the 0202 USB 2.0 to your computer using the supplied USB
cable, and turn it on.If Windows prompts you with an Add New Hardware
Wizard, click Cancel.
2. Insert the USB 2.0 Software/Manual Installation CD-ROM into your CD-
ROM drive. If Windows AutoPlay mode is enabled for your CD-ROM drive,
the CD starts running automatically. If not, from your Windows desktop, click
Start->Run and type d:\setup.exe (replace d:\ with the drive letter of your
CD-ROM drive). You can also simply open the CD and double-click
Setup.exe.
3. The installation splash screen appears. Follow the instructions on the screen.
You will have the option to install:
• E-MU USB Audio
• Adobe Reader
4. Choose "Continue Anyway" when you encounter the "Windows Logo
Testing" warning screen. See the note below.
5. When prompted, restart your computer.
6. Be sure to register your 0202 USB 2.0 so we can advise you of future software
updates and special offers. You can register online at: www.emu.com/register
7. Your 0202 USB 2.0 is now ready to use.
Install the Production Tools Bundle
8. Insert the Windows Production Tools Software Bundle CD-ROM into your
CD-ROM drive.
9. The installation splash screen appears. Follow the instructions on the screen
to complete the installation.
Note About Windows Logo Testing
When you install the 0202 drivers, you will see a dialog box that informs you that
the driver has not passed Windows Logo testing.
However, the 0202 drivers have been rigorously tested using the same test proce-
dures that a signed driver requires, and it passes in all important categories,
including those that measure the relative stability of the driver. So, it is perfectly
safe to install these drivers on your computer.
E-MU Systems
8
Werbung
Inhaltsverzeichnis
