Panasonic GP-US932CSAE Handbuch Seite 28

Symptom
Blurred whole screen
Plural edges visible
"AWC OK" not displayed
Black bars at right and left of
image
Vertically longer image
No sound from monitor
28
Cause/solution
• Is the lens aperture appropriately adjusted?
Check whether the aperture is appropriately adjusted.
Use lenses with recommended F number or higher and
3CCD-specific lenses.
• Try to change the setting of "DTL MODE".
• Try to change the monitor cable.
• When the screen is too bright, narrow the lens aperture
or set "ELC" to "ON".
• This phenomenon depends on the specifications of the
monitor.
Select the wide and full screen display at the monitor
side.
• This unit provides outputs on the assumption that the
screen is 16:9.
Select the wide screen display at the monitor side.
• The monitor is not applicable to sound output.
Reference
pages
14
20
—
14, 18
—
—
—