Buffalo Filter PlumeSafe Turbo Bedienungsanleitung Seite 21

Table 4
Recommended Separation Distance Between
Portable and Mobile RF Communications Equipment and the model @ 3 Vrms
The Turbo Auto-Sense™ is intended for use in an electromagnetic environment in which radiated RF distubances are
controlled. The customer or the user of the Turbo Auto-Sense™ can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
Smoke Shark II as reccomended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation Distance (D) in Meters
(M) can be estimated using the equation applicable to the frequency of the transmitter, where (P) is the maximum output
rating of the transmitter in Watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structure, objects, and people.
Separation distance according to frequency of transmitter m
150 kHz to 80MHz
[ ]
3.5
d = √P d =
v
1
0.12
0.34
1.7
3.7
11.7
80 kHz to 800 MHz
[ ]
3.5
√P d =
E
1
0.12
0.34
1.7
3.7
11.7
Buffalo Filter Turbo Auto-Sense
800 kHz to 2.5 GHz
[ ]
3.5
√P
E
1
0.23
0.74
2.3
7.4
23.3
™ Operator's Manual: Page 21