Labels Supplied With The Accessories Bag - ZANKER KHV3321N Benutzerinformation

Problem
and a number come on.
You can hear a constant beep
noise.
comes on.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send this part (if
applicable).
B. Stick it on Guarantee Card and keep this part (if
applicable).
Possible cause
There is an error in the hob.
The electrical connection is incor-
rect.
The second phase of the power
supply is missing.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
servicing by a service technician or dealer will not be
free of charge, also during the warranty period. The
instructions about the Service Centre and conditions of
guarantee are in the guarantee booklet.

Labels supplied with the accessories bag

Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
Remedy
Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
Disconnect the hob from the electri-
cal supply. Ask a qualified electri-
cian to check the installation.
Check if the hob is correctly connec-
ted to the electrical supply. Remove
the fuse, wait one minute, and insert
the fuse again.
TYPE
IP20
27