Exploring The Generator Capabilities; Setting-Up An Arbitrary Wave Signal - Aim-TTI TGF3162 Kurzanleitung

6

Exploring the Generator Capabilities

In the following examples only the parameter settings are described, together with the related key names.
The resultant output waveforms are shown, along with the sync or trigger waveform where relevant.
Output amplitude and offset settings are examples only and need not be followed.
6.1

Setting-up an arbitrary wave signal

Start with the instrument returned to Default Settings.
MENU
Arbitrary waveform
Parameter
Wave selection
Frequency
Amplitude
Offset
Parameter
Output State
16
HARD KEY NAME
Arb
Soft-key Name
Waves > > Sinc > Done
Freq
Ampl
Offset
HARD KEY NAME
Output1 / Output 2
Setting
Sinc
10kHz
2V
5mV
Setting
On